Configuration

When the devices are correctly connected and configured, they can be added to the Envi.Baseenvi.base De energiecontroller van Envitron die apparaten uitleest, aanstuurt en data opslaat achter de hoofdaansluiting. via the Envitron installation tool. Go to install.envitron.com and log in. If you do not yet have login credentials, request them via support@envitron.com. An installation can only be created after a signed order has been obtained.

In the installation tool, create the relevant device under the correct device category, select the appropriate communication settings, and give the device a clear name. This name will also be displayed as such in the portal.

Then test in the installation tool whether the measured values are displayed correctly.
If it concerns a controllable device, check with a brief control signal whether the device responds correctly. After the operation of all devices has been verified, the installation can be handed over to the technical support department for completion. Envitron will then ensure that the correct control strategies are configured.

For an overview of the control strategies, go to Control Strategies